Here are some pictures of the recent videos of Mark's Generator.
Picture 1:
- 12HP 2cyl engine, 8KW 220V AC alternator ESA approved
- currently unused water tower for cooling
Picture 2:
- Flexible Aluminum exhaust pipe
- 2 piston exhaust joined in a Y-joint
- Copper fuel line is wrapped around exhaust for pre-heating (better burn, better flow)
Picture 3:
- 3 fuel tanks (Veg-1, Diesel, Veg-2)
- Flexible Aluminum exhaust pipe
- Copper fuel line is wrapped around exhaust for pre-heating (better burn, better flow)
- Exhaust going out the fron door for now.
2008-04-01
2008-03-31
Mark's Lister in operation
Here are two videos of Mark's generator in operation.
Added since last post:
1. exhaust pipes vent to outside (flex pipe on left)
2. glow plugs added for easier starting (battery powered - right)
3. 3 40L fuel jugs hung from cieling
4. 3-to-1 fuel valve to select fuel (diesel or veggie)
Still to-do:
1. cooling system
2. muffler
3. sound-proof the shed
4. install electrical cables to his house
With any luck, he'll have a generator working for this spring's thaw-and-melt-and-flood-your-basement season.
Video 1: Single cylinder firing.
Video 2: Both cylinders firing.
Added since last post:
1. exhaust pipes vent to outside (flex pipe on left)
2. glow plugs added for easier starting (battery powered - right)
3. 3 40L fuel jugs hung from cieling
4. 3-to-1 fuel valve to select fuel (diesel or veggie)
Still to-do:
1. cooling system
2. muffler
3. sound-proof the shed
4. install electrical cables to his house
With any luck, he'll have a generator working for this spring's thaw-and-melt-and-flood-your-basement season.
Video 1: Single cylinder firing.
Video 2: Both cylinders firing.
Subscribe to:
Posts (Atom)